The Best Option Was To Use A Composite Bracelet Anode Design (Figure 4).
The acceptance criteria for steel inserts should be. Narenr (marine/ocean) 23 jan 09 09:44. Pipelines bracelet anodes can be either half shell or segmented bracelet anodes.
All Anode Dimensions Such As Thickness, Length, And Gap Can Be Modified By Mold Design To Accommodate Your Specific Requirements.
In the mark v er, the anode and cathode. It’s well equipped r&d and computerized design & engineering department carry out the study. Bracelet anodes are often used on pipeline protection projects.
The Type Of Anode Design To Be Applied Is Normally.
The aluminum anode bracelets shall be internally sized to fit the outside diameter of the pipe plus its corrosion coating system. For pipe which is concrete weight coated, the bracelets shall be. This should be checked for a minimum of 10% of the anodes of each design.
This May Be Extended By The Purchaser If Required.
01224 624377 aluminium and zinc castings • aluminium… In this approach, the anode segments are actually small standoff anodes arranged radically 4 (10 cm) off the pipe. Pipelines bracelet anodes can be either half shell or segmented bracelet anodes.
The Cathode Is A Solid Steel Rod (Westphal Et Al., 2009 ).
Sacrificial bracelet anodes installed on nord stream pipe joints. Military specification for anodes, corrosion preventive, zinc; Directly on the pipeline itself (bracelet type anodes).
